Description; Control Panel; How To Set The Unit; Main Functions - Elumen8 Beam 1RE User Manual

3. Description

3.1 Control Panel
1. Button:
MENU To select the programming functions
DOWN To go forward in the selected functions
UP To go backward in the selected functions
ENTER To confirm the selected functions
2. Microphone: To receive music for sound active;
3. LED:
DMX On
SOUND Flashing
4. Function Display: Used to show the various menus and selected functions;
5. Fuse(T5A): Protects the unit from over-voltage or short circuit;
6. Power In/out: Used to connect to supply power.
7. DMX In/out: 3-pin XLR connectors for DMX 512 operation;
4. How To Set The Unit
4.1 Main Function
Press the MENU button into menu mode, press the UP and DOWN buttons until the required
function is shown on the display. Select the function by pressing the ENTER button. Use the UP
and DOWN buttons to choose the submenu, press the ENTER button to store and automatically
return to the last menu. Press the MENU button or leave the unit idle for one minute to exit the
menu mode. In the event of power loss, press the UP button for one minute to enter into menu
mode. Press the MENU button or leave the unit idle for one minute to exit.
The main functions are shown below:
DMX input present
Sound activation
5A