Home Position Adjustment - Elumen8 Beam 1RE User Manual

Reset
To select Reset, press the ENTER button and all channels of the unit will return to their standard
positions.
4.2 Home Position Adjustment
Press and hold the MENU button for at least 3 seconds then press and hold the ENTER button for
at least 5 seconds to enter into offset mode to adjust the home position for the motors. Use the
Up and Down buttons to adjust the value, press the ENTER button to setup. To go back to the
functions without any changes press the MENU button.
PAN OFFSET —Pan home position adjustment
To select the Pan Offset, press the ENTER button to show PAN OFFSET on the display. Use
the UP and DOWN buttons to adjust the value from -127 to 127, press the ENTER button to store.
Press the MENU button to exit.
TILT OFFSET —Tilt home position adjustment
To select the Tilt Offset, press the ENTER button to show TILT OFFSET on the display. Use the
UP and DOWN buttons to adjust the value from -127 to 127, press the ENTER button to store.
Press the MENU button to exit.
DIMMER OFFSET —Dimmer flag position adjustment
To select the Dimmer Offset, press the ENTER button to show DIMMER OFFSET on the
display. Use the UP and DOWN buttons to adjust the value from 0 to 255, press the ENTER
button to store. Press the MENU button to exit.
10A