Elumen8 Beam 1RE User Manual page 4

more than 12 meters.
Disconnect mains power before fuse/lamp replacement or servicing.
—
Replace fuse/lamp only with the same type.
—
In the event of a serious operating problem, stop using the unit immediately.
—
Never turn the unit on and off in short intervals.
—
The housing, lenses, or the ultraviolet filter must be replaced if they are visibly damaged.
—
Do not open the unit as there are no user serviceable parts inside.
—
Do not attempt to repair the unit by yourself. Repairs carried out by unskilled people can lead
—
to damage or malfunction. Please contact the nearest authorized technical assistance center if
needed.
Disconnect the mains power if the fixture is not to be used for a long time.
—
Use the original packing materials before transporting the unit.
—
To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or
—
moisture.
Hot lamp explosion hazard. Do not open the unit within 15 minutes after switching off.
—
Replace the lamp once it is damaged, deformed or past its expiry hours
—
Do not look directly at the light while the lamp is on.
—
Never touch the lamp with bare fingers, as it is very hot after use.
—
Do not switch on the unit without lamp enclosure or when housing is damaged.
—
3A