1. Manuals
  2. Brands
  3. Sinclair Manuals
  4. Air Conditioner
  5. ASC-XXAIN
  6. User manual

Sinclair ASC-XXAIN User Manual

New uni dc inverter
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
USER'S MANUAL
NEW UNI DC INVERTER
INDOOR CASSETTE UNITS
ASC-xxAIN

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ASC-XXAIN and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Sinclair ASC-XXAIN

Summary of Contents for Sinclair ASC-XXAIN

  • Page 1 USER'S MANUAL NEW UNI DC INVERTER INDOOR CASSETTE UNITS ASC-xxAIN...
  • Page 2 “Original instructions”  ...
  • Page 3 DC Inverter Cassette Type Air Conditioner Installation and Operation Manual Read the following carefully to assure safe use. NOTE: Children should be supervised to ensure that they do not play with the appliance.
  • Page 4 DC Inverter Cassette Type Air Conditioner Installation and Operation Manual NOTE: This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

  • Page 5: Safety Precautions

    1 Safety Precautions This mark indicates procedures which, if improperly performed, might lead to the WARNING! death or serious injury of the user. This mark indicates procedures which, if improperly performed, might possibly result CAUTION! in personal harm to the user, or damage to property. WARNING! (1).
  • Page 6 (14). During installation, attach the refrigerant piping securely before running the compressor. If the compressor is not attached and the stop valve is open during pump-down, air will be sucked in when the compressor is run, causing abnormal pressure in the freezer cycle which will lead to breakage and even injury.
  • Page 7 2 Outline of the Unit and Main Parts Indoor 1. Drainage device 2. Drainage pipe 3. Air flow flap Outdoor 4. Connection pipe Air inlet 5. Wireless Controller 6. Wired Controller 7. Big handle 8. Liquid Pipe 9. Gas pipe 10.

  • Page 8: User Notice

    Wireless Remote Controller YB1FA 1 User notice CAUTION ! Make sure there is no obstruction between the wireless remote controller and the signal ① receiver. The signal receiving distance of the wireless remote controller can be up to 10 metres. ②...
  • Page 9 Wireless Remote Controller YB1FA Name Function Description Signal ● Signal transmitter transmitter ● Press this button, and the unit will be turned on; press it once more, and the ON/OFF unit will be turned off. When turning off the unit, the Sleep function will be button canceled, but the presetting time is still remained.
  • Page 10 Wireless Remote Controller YB1FA ● Press this button to set up the swing angle, which circularly changes as below: ● When the guide louver starts to swing up and down, if SWING funtions is canceled, the air guide louver will stop and remains at the current position.

  • Page 11: Introduction For Special Function

    Wireless Remote Controller YB1FA ● By pressing this button it is allowed to select displaying the indoor setting temperature or the indoor ambient temperature. ● Indoor setting temperature is default after the indoor unit is energized initially. ● By pressing the TEMP button, when the temperature symbol TEMP displayed, the indoor...

  • Page 12: Replacement Of Batteries

    Wireless Remote Controller YB1FA heating quickly so that the ambient temperature will approach the preset temperature as soon as possible. ● About lock Press + and - buttons simultaneously to lock or unlock the keyboard. If the wireless remote controller is locked, the icon will be displayed on it, in which case, any press will get no response but with the mark blinking for three times.

  • Page 13: Introduction To The Wired Controller

    Wired Controller XK60 1 Introduction to the Wired Controller Fig.1 Appearance of the Wired Controller 1.1 Appearance and LCD Icons Fig.2 Appearance of the LCD...

  • Page 14: Introduction To The Lcd Icons

    Wired Controller XK60 1.2 Introduction to the LCD Icons Table 1 Icons Introduction Left and right swing function Up and down swing function Air exchange function Sleep function Auto mode COOL mode DRY mode FAN mode HEAT mode Health function I-Demand function Vacation function Status display of master and slave wired controller...
  • Page 15 Wired Controller XK60 Electric heater Blow function Defrosting function Filter cleaning Timer Setting Keycard control / Detected status sensed by human body Quiet function Lock function...

  • Page 16: Instruction To The Function Of Press Buttons

    Wired Controller XK60 2 Press Buttons 2.1 Buttons Fig.3 Press Buttons 2.2 Instruction to the Function of Press Buttons Table 2 Press Buttons Function Introduction ① .Function selection and canceling; Enter/Cancel ② .Press it for 5s to enquiry the outdoor and indoor ambient temperature. ①...

  • Page 17: Mode Setting

    Wired Controller XK60 3 OPERATION INSTRUCTION 3.1 On/off Press the On/Off button to turn on or off the unit. Notes: The state shown in Fig.4 indicates the OFF state of the unit after energization. ① . The state shown in Fig.5 indicates the ON state of the unit after energization. ②...

  • Page 18: Temperature Setting

    Wired Controller XK60 3.3 Temperature Setting Press ▲ or ▼button to increase or decrease setting temperature under on-state of the unit. If press either of them continuously, temperature will be increased or decreased by 1°C every 0.5s. In Cooling, Dry, Fan and Heating mode, temperature setting range is 16°C~30°C. In Auto mode, the setting temperature is un-adjustable.

  • Page 19: Right And Left Swing

    Wired Controller XK60 3.5 Right and Left Swing Under the ON state of unit, press the Function button to select the “Right and Left Swing” function option and then press the Enter/Cancel button to activate it. When the Swing function is activated, press the Function button to select the "Right and Left Swing"...

  • Page 20: Timer Setting

    Wired Controller XK60 3.6 Up and Down Swing Under the ON state of unit, press the Function button to select the "Up and Down Swing" function option and then press the Enter/Cancel to activate it. When the Swing function is activated, press the Function button to select the "Up and Down Swing"...

  • Page 21: Air Exchange Setting

    Wired Controller XK60 Cancellation of Timer Setting: The timer setting can be canceled by press “Timer”. Then , xx. Hour won’t be displayed. Timer Setting under the ON state of the Unit is as shown in Fig.11: Unit On, no timer function Press “Timer”...
  • Page 22 Wired Controller XK60 1――The unit continuously runs for 60min, and fresh air valve runs for 6 min. 2――The unit continuously runs for 60min, and fresh air valve runs for 12 min. 3――The unit continuously runs for 60min, and fresh air valve runs for 18 min. 4――The unit continuously runs for 60min, and fresh air valve runs for 2 4 min.

  • Page 23: Sleep Setting

    Wired Controller XK60 3.9 Sleep Setting Sleep on: Press the Function button under the ON state of the unit to select the “Sleep” function option and then press the Enter/Cancel button to activate it. Sleep off: When the Sleep function is activated, press the Function button to select the Sleep function option and then press the Enter/Cancel button to deactivate this function.
  • Page 24 Wired Controller XK60 e.g. If the setting temperature is 25°C, the temperature will rise by 1°C in each hour until it reaches 27°C. 7 hours later, the temperature will drop to 26°C. After that, the unit will run at this temperature.

  • Page 25: Health Setting

    Wired Controller XK60 3.10 Health Setting Under unit on status, press “Function” button to select health function with “Health” icon flashing. Press “Enter/Cancel” button to activate health function. When health is on, press “Function” button to set function, with “health” icon flashing. Then press the “Enter/Cancel”...

  • Page 26: Vacation Setting

    Wired Controller XK60 Unit On, no I-Demand function Press “Function” button to set Press “Enter/Cancel” button to I-Demand function activate I-Demand function Press “Enter/Cancel” button to Press “Function” button to set cancel I-Demand function I-Demand function Fig.17 I-Demand Setting Note: The I-Demand function can be cancelled by mode switch and unit ON/OFF.

  • Page 27: Turbo Function Setting

    Wired Controller XK60 Unit On, no Vacation function Press “Function” button to set Press “Enter/Cancel” button to vacation function activate vacation function Press “Enter/Cancel” button to Press “Function” button to set cancel vacation function vacation function Fig.18 Vacation Setting Note: The vacation function can be only set under heating mode.

  • Page 28: Save Function Setting

    Wired Controller XK60 button to select the "Turbo" option and then pressing the Enter/Cancel button. Turbo function setting is as shown in Fig.19: Unit On, no Turbo function Press “Function” button to set Press “Enter/Cancel” button to turbo function activate turbo function Press “Enter/Cancel”...
  • Page 29 Wired Controller XK60 Cancel button to activate this function. The activated SAVE function can be deactivated by firstly pressing the “Function” button to select the “SAVE” option and then pressing the “Enter/Cancel” button. The energy saving setting is as shown in the Fig.20: Unit On, no Save function Press “Function”...

  • Page 30: E-Heater Setting

    Wired Controller XK60 3.15 E-HEATER Setting E-HEATER: in the HEAT mode, “E-HEATER” function is allowed to be activated to improve the heating efficiency. Generally, it will be activated automatically as the unit goes into the HEAT mode through any button operations . Activation of the “E-HEATER”...

  • Page 31: Filter Setting

    Wired Controller XK60 Deactivation of the “Blow” Function: The activated “Blow” function can be deactivated by firstly pressing the Function button to select the “Blow” option and then pressing the Enter/Cancel button. BLOW function setting is as shown in Fig.22: Unit On, no Blow function Press “Function”...
  • Page 32 Wired Controller XK60 Unit On, no Filter function Press “Function” button to set filter function the pollution level Press “Function” button to set Press “Enter/Cancel” button “00” shown at the timer area filter function to activate filter function Press “Enter/Cancel” button to cancel filter function Fig.23 Filter Setting While setting Filter, two numbers will be shown on the timer area.

  • Page 33: Quiet Function Setting

    Wired Controller XK60 “0” shows up at the second place, the accumulated operating hour reaches 1400h. Every increase of the number means another 400h is accumulated. When “9” shows up, it means the operating hour reaches 5000h. When the filter reaches serious-level pollution, “3” will be shown at the first place, When ④...

  • Page 34: Ultra-Dry Setting

    Wired Controller XK60 Unit On, no Quiet function Press “Function” button to set Press “Enter/Cancel” button to quiet function activate quiet function Press “Enter/Cancel” button to Press “Function” button to set cancel quiet function quiet function Fig.24 Quiet function setting Notes: "QUIET"...
  • Page 35 Wired Controller XK60 3.20.2 Memory Function Memory switchover: Under the OFF state of the unit, press the Mode and ▲ buttons at the same time for 5s to switch memory modes. When setting the memory mode, “MEMORY” will be displayed. If this function is deactivated, the unit will go to the OFF state after power recovery. Memory recovery: If the memory function is On, the wired controller after power failure will resume its original running state upon power recovery.
  • Page 36 Wired Controller XK60 Unit off Simultaneously press “Function” Press “Mode” button to set till and “Timer” button for 5s, the “05” is shown on the temperature wired controller will enter displayed area. Then the unit will parameter setting interface. enter the indoor fan shutdown mode. Press “Enter/Cancel”...

  • Page 37: Installation Location And Installation Requirements

    Wired Controller XK60 4.2 Installation Location and Installation Requirements (1). Do not install the wired controller in the damp place or under direct sunlight. (2). Do not install the wired controller close to the hi-temperature object or place where the wired controller is likely to suffer water spray.

  • Page 38: How To Remove The Wired Controller

    Wired Controller XK60 Brief instructions: Pull out the 2-core signal line from the mounting hole and pass this line through the round ① . hole located at the bottom of the wired controller. Use M4×25 screws to fix the soleplate of the wired controller on the wall. ②...
  • Page 39 Wired Controller XK60 Error codes and their meanings: Table 5 Number Error code Error Compressor high pressure protection Indoor anti-freeze protection Compressor low pressure protection, refrigerant lack protection and refrigerant colleting mode Compressor high discharge temperature protection Communication error Indoor fan motor error Full water protection Indoor ambient temperature sensor error Evaporator temperature sensor error...
  • Page 40 Wired Controller XK60 Drive module over temperature protection Zero passage protection AC current protection Drive current error Sensor connecting protection Temperature drift protection Bus low voltage protection Bus high voltage protection Charge loop error Input voltage abnormality Drive memory chip error...
  • Page 41 Instructions to the Error Indicating Lamps on the Panel of the Cassette Type Unit. Receiver "88" Dispaly "Auto" Button Power Timer "Test" Button Indicating Lamp Indicating Lamp Fig.46 Power and ON/OFF Indicating Lamp: ◆ It goes red when the unit is powered on while it goes white when the unit is started. Timer Indicating Lamp: ◆...

  • Page 42: Working Temperature Range

    “88” Display: ◆ When there is no error, and it receives valid remote control information. It will display the temp setup for 5s, then display the temp of indoor. When the unit has error, It will display the error code. When there are more than one error, the error code will be displayed alternately.

  • Page 43: Troubleshooting And Maintenance

    Note: After carrying out the check of the above items and taking relevant measures to solve the problems but the air-conditioning unit still does not function well, please stop the operation of the unit immediately and contact the local service agency designated by Sinclair Ltd. Only ask professional serviceman to check and repair the unit.
  • Page 44 DC Inverter Cassette Type Air Conditioner Installation and Operation Manual The following are not troubles:...

  • Page 45: Routine Maintenance

    7.2 Routine Maintenance Only a qualified service person is allowed to perform maintenance. Before accessing to terminal devices, all power supply circuits must be disconnected. Do not use water or air of 50°C or higher for cleaning air filters and outside panels. Notes: Do not operate the air conditioner with the filter uninstalled, otherwise dust would come into ①...
  • Page 46 2. Disassemble the air inlet grille Open the air inlet grille at 45°, raise it and remove the grille. 3. Disassemble the filter screen Draw out the filter screen and remove it. Filter screen 4. Disassemble the air purifier Filtering element Remove the air purifier after removing the Support fixed screws on it.

  • Page 47: Optimum Operation

    DC Inverter Cassette Type Air Conditioner Installation and Operation Manual 10. Optimum Operation...

  • Page 48: Care And Maintenance(It Should Be Done By Professionals)

    DC Inverter Cassette Type Air Conditioner Installation and Operation Manual 11. Care and Maintenance(It should be done by professionals)
  • Page 49 DC Inverter Cassette Type Air Conditioner Installation and Operation Manual...
  • Page 50 DC Inverter Cassette Type Air Conditioner Installation and Operation Manual...
  • Page 51 DC Inverter Cassette Type Air Conditioner Installation and Operation Manual Operate on unmentioned buttons would not impact on the normal use.
  • Page 52 185/2001 Coll., in the wording of later regulations. In case of incorrect disposal of this waste, a fine can be imposed according to national regulations. Manufacturer: Sinclair Corporation Ltd., 1-4 Argyll Street, London W1F 7LD, UK Supplier and technical support: Nepa, spol.s.r.o.

Table of Contents