Page 2
Remove Remove Remove Remove Remove Remove Remove Remove Remove Remove Remove Remove Remove Remove Remove Remove Remove Remove Remove Remove Remove Remove Remove Remove Remove Remove Remove Remove Remove Fig 1: Thermistor is part of the Power PBCA Asm Remove Remove Remove Remove...
Page 3
Disassembly advice - Stand GC6611 SCREW CAP 57 PUMP BRACKET 41, 44 SILICON CUSHION 56 PUMP ASSY 42 INSULATION BASE 55 CORD CLAMP 45 UNIT BASE COVER 51 CORD BOX COVER 50 BOTTOM FOOT 40 TERMINAL BLOCK 46 WATER TANK ASM 36 SWITCH BRAKET &...
Page 4
Service code Description Service code Description Control PCB assy Release button Control PCB box Lamp cover Lock fastener Steam knob Location fastener Housing Bolt base Knob cylinder Water tank asm Knob spring Seal ring Steam tube connector Water tube connector Base Silicon tube Thermal insulation pad...
Page 7
Repair Instruction • Due to the high wattage of the iron, only the speci ed cord set must be used. • Should damage be observed on the , it must be replaced. • Continued usage is not allowed. • If is provided without type plate information eg.
Need help?
Do you have a question about the GC6611 and is the answer not in the manual?
Questions and answers