Roland SJ-1045EX User Manual page 8

To Ensure Safe Use
Danger of electrical short, shock, electrocution, or fire
This machine carries a high current of a maximum of approximately 10 amperes. This can cause situations
WARNING
that could not occur with low-power equipment; use caution.
This machine has high-temperature
WARNING
areas (platen and dryer). Exercise cau-
tion to avoid fire or burns.
Do not use with any electrical power
supply that does not meet the ratings
Never leave media loaded in the ma-
displayed on the unit.
chine when printing is not being per-
formed.
Use with any other power supply may lead to
fire or electrocution.
The continued application of heat at a single
location may cause fire or produce toxic gases.
When printing is not being performed, switch
Never operate the machine or insert
off the power or remove any loaded media.
or remove its power plug with wet
hands.
Doing so may result in electrical shock or elec-
trocution.
Important Notes Regarding Operators and the Work Area
Never allow the machine to get wet,
or apply gasoline, thinner, or any other
WARNING
flammable material to it.
Current leakage may cause electrical shock,
Never operate the machine when tired
electrocution, or combustion and fire.
or after ingesting alcohol or medica-
tions.
Never allow hairpins, coins, matches,
Operation requires lifting heavy objects and
or any other object to get inside the
unimpaired judgment, and unexpected injury
machine through the ventilation ports.
may result.
Doing so may cause and electrical short, re-
sulting in shock or electrocution, or the in-
Conduct operations in a clean, brightly
serted object may catch fire.
lit location.
Working in a location that is dark or cluttered
Never place gasoline, alcohol, thinner,
can be hazardous. Operations in such loca-
or any other flammable material near
tions may cause an accident, such as tripping
the machine, or use an aerosol spray
and becoming pinned under the roll media.
close to the machine.
Doing so may cause fire.
Never damage the power cord or pull
it with force.
Doing so may tear the cord's insulation, caus-
ing an electrical short and resulting in electri-
cal shock, electrocution, or fire.
Never place any object on the power
cord, bend the power cord using ex-
cessive force, or allow the power cord
to become deformed.
The cord carries a high current of approxi-
mately 10 amperes. If it becomes deformed, the
deformed location may grow hot and cause fire.
6
Downloaded From ManualsPrinter.com Manuals Downloaded From ManualsPrinter.com Manuals
Danger of fire, burns, or toxic gas emissions
Never use media that cannot with-
stand the heat.
Doing so may result in fire or the release of
toxic gases, or may degrade the media.
Never use the machine with the power
cord bound into a bundle or roll.
Never use the platen or dryer for any
The cord carries a high current of approxi-
purpose for which they are not in-
mately 10 amperes. If the cord is in a bundle
tended, such as to dry clothing.
or roll, it may grow hot and cause fire.
Doing so may cause overheating, resulting in
fire or accident.
Never use any power cord other than
the power cord included with the ma-
chine. Also, never use a power strip or
extension cord.
The cord carries a high current of approxi-
mately 10 amperes. The power strip or exten-
sion cord may grow hot and cause fire.
CAUTION
Do not use with a damaged power cord
or plug, or with a loose electrical out-
Never attempt operation while wear-
let.
ing a necktie, necklace, loose clothing,
Doing so may lead to fire, electrical shock, or
or the like. Bind long hair securely.
electrocution.
Such items may become caught in the media
take-up system or other areas, resulting in in-
When unplugging the electrical power
jury.
cord from the power outlet, grasp the
plug, not the cord.
Never climb or lean on the machine.
Unplugging by pulling the cord may damage it,
The machine is not made to support a person.
leading to fire, electrical shock, or electrocu-
Climbing or leaning on the machine may move
tion.
away components and cause in a slip or fall,
resulting in injury.
Ground the unit with the ground wire.
Failure to do so may result in risk of electro-
cution in the event of a mechanical problem.
In the event of an abnormal state (such
as smoke or sparks, odor or burning
or unusual noise), immediately unplug
the power cord.
Failure to do so may result in fire, electrical
shock, or electrocution. Immediately discon-
nect the power cord and contact your Ro-
land DG Corp. service center.