Lincoln MKZ Owner's Manual page 472

Change the appearance of the map display
by repeatedly pressing the arrow button in
the upper left corner of the screen. It toggles
between three different map modes:
Heading up, North up and 3D.
Heading up (2D map) always
shows the direction of forward
travel to be upward on the screen.
E142642
This view is available for map
scales up to 2.5 miles (4 kilometers). The
system remembers this setting for larger map
scales, but shows the map in North up only.
If the scale returns below this level, the
system restores Heading up.
North up (2D map) always shows
the northern direction to be
upward on the screen.
E142643
3D map mode provides an
elevated perspective of the map.
This viewing angle can be adjusted
E142644
and the map can be rotated 180
degrees by touching the map twice, and then
dragging your finger along the shaded bar
with arrows at the bottom of the map.
MKZ (CC9) Canada/United States of America, enUSA, Second Printing
MyLincoln Touch
You can also select the following options:
Menu Items Description
View Switches between
full map, street list
and exit view in
route guidance.
Menu Displays a pop-up
box that allows
direct access to
navigation settings.
Press the speaker button on the
map to mute route guidance. When
E174017
the light on the button illuminates,
the feature is on. The speaker button
appears on the map only when route
guidance is active.
Re-center the map by pressing this
icon whenever you scroll the map
E146188
away from your vehicle's current
location.
469
Auto Zoom
Press the green bar to access map mode,
then select the + or - zoom button to bring
up the zoom level and Auto buttons on the
touchscreen. When you press Auto, Auto
Zoom turns on and Auto displays in the
bottom left corner of the screen in the map
scale. The map zoom level then synchronizes
with vehicle speed. The slower your vehicle
is traveling, the farther the map zooms in;
the faster your vehicle is traveling, the farther
the map zooms out. To switch off the feature,
just press the + or - button again.
In 3D mode, rotate the map view by swiping
your finger across the shaded bar with the
arrows.
The ETA box under the zoom buttons
appears when a route is active and displays
the distance and time to your destination. If
the button is pressed, a pop up appears with
the destination listed (and waypoint if
applicable) along with mileage and time to
destination. You may also select to have
either the estimated time to reach your
destination or your estimated arrival time.