Basics; Getting Started; Select The Display Language And Cancel The Demonstration - Kenwood KMM-BT502DAB Instruction Manual

BASICS

Faceplate
Volume knob
Detach button
Attach Detach
To
Turn on the power
Adjust the volume
Select a source
Change the display information
Display window
How to reset
Press the switch twice
within 5 seconds
after detaching the
faceplate.
On the faceplate
Press .
• Press and hold to turn off the power.
Turn the volume knob.
Press repeatedly.
Press DISP repeatedly. ( 23)

GETTING STARTED

1
Select the display language and cancel the
demonstration
When you turn on the power for the first time (or [FACTORY RESET]
is set to [YES], 5), the display shows: "SEL LANGUAGE" "PRESS"
"VOLUME KNOB"
1
Turn the volume knob to select [ENG] (English), [RUS]
(Russian) or [SPA] (Spanish), then press the knob.
[ENG] is selected for the initial setup.
Then, the display shows: "CANCEL DEMO" "PRESS"
"VOLUME KNOB".
2
Press the volume knob.
[YES] is selected for the initial setup.
3
Press the volume knob again.
"DEMO OFF" appears.
Then, the display shows the selected crossover type:
"2-WAY X ' OVER" or "3-WAY X ' OVER"
• To change the crossover type, see "Change the crossover type"
( 5).
3
ENGLISH