Analog Radio - Kenwood KMM-BT502DAB Instruction Manual

Digital media receiver
Table of Contents

Advertisement

Available languages

Available languages

ANALOG RADIO

Search for a station
1
Press
repeatedly to select TUNER.
2
Press
repeatedly to select FM1/ FM2/ FM3/ MW/ LW.
3
Press S / T to search for a station.
• To change the searching method for S / T: Press
repeatedly.
AUTO1
: Automatically search for a station.
AUTO2
: Search for a preset station.
MANUAL : Manually search for a station.
• To store a station: Press and hold one of the number buttons (1 to 6).
• To select a stored station: Press one of the number buttons (1 to 6).
Other settings
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select an item (see the following table),
then press the knob.
3
2
Repeat step
until the desired item is selected or activated.
4
Press and hold
to exit.
To return to the previous setting item, press
8
TUNER SETTING
LOCAL SEEK
AUTO MEMORY
MONO SET
NEWS SET
REGIONAL
AF SET
TI*
PTY SEARCH
.
ON: Searches only stations with good reception. ; OFF: Cancels.
• Settings made are applicable only to the selected source/station. Once
you change the source/station, you need to make the settings again.
YES: Automatically starts memorizing 6 stations with good reception. ;
NO: Cancels.
• Selectable only if [NORMAL] is selected for [PRESET TYPE]. (  4)
ON: Improves the FM reception, but the stereo effect may be lost. ;
OFF: Cancels.
ON: The unit will temporarily switch to News Programme if available. ;
OFF: Cancels.
ON: Switches to another station only in the specific region using the "AF"
control. ; OFF: Cancels.
ON: Automatically searches for another station broadcasting the same
program in the same Radio Data System network with better reception
when the current reception is poor. ; OFF: Cancels.
ON: Allows the unit to temporarily switch to Traffic Information if
available ("TI" lights up). ; OFF: Cancels.
* [TI] in MW/LW band is for enabling traffic interruption to DIGITAL
AUDIO source only.
1 Press the volume knob to enter PTY language selection.
2 Turn the volume knob to select the PTY language (ENGLISH/
FRENCH/ GERMAN), then press the knob.
3 Turn the volume knob to select the available Program Type (  9).
4 Press S / T to start searching.
Default: XX

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents