Temperature Reading; If Abnormal Operation Appears; In Case Of Malfunction - Panasonic 5300U Operating Instructions Manual

Temperature Reading

Press and hold
BASS/TREB/BAL/FADER
Press and release
BASS/TREB/BAL/FADER

In Case of Malfunction

BASS/TREB/BAL/FADER
17
To read the temperatare outside the vehicle, press and hold the
knob [SEL] for more than 2 seconds. The current temperature in
Fahrenheit appears on the display.
Press and hold the knob [SEL] for more than 2 seconds again to
cancel the temperature reading mode.
Press and release the knob [SEL] to shift the temperature display
to the current operating mode.
Notes:
The temperature Sensor Lead must be connected. (option)
The temperature reading range is -22°F~140°F. The display will -
22°F when the temperature is lower than -22°F or 140°F when
higher than 140°F.
If you change the temparature reading mode to the other mode
(EX. Tape mode
mode for 5 seconds and then resume the temperature reading.
Reset Switch
If the unit does not respond when the function buttons are
pressed, press the reset switch with a small pointed object,
such as a pencil point. This will restore the unit to its default
settings. All previously stored memory settings will be
erased. Repeat the necessary steps in the previous pages to
reprogram the clock and memory settings. If pressing the
reset switch does not restore normal operation, please return
the radio to the nearest authorized service center for service.
(Only for CQ-5500U)
CD changer mode) the display will show that
l
k