Operating Instructions; Setting Clock; Easy Cook; Time Cook - Maytag UMC1061AA Owner's Manual

Operating Instructions

SETTING CLOCK

This is a 12 hour clock. When your
oven is plugged in for the first time or
when power resumes after a power
interruption, the numbers in the dis-
play reset to 0.
Example: To set 11:11
1. Touch CLOCK.
2. Enter the time by
using the number
key pads.
Touch [1], [1], [1]
and [1].
3. Touch CLOCK.
The clock starts
counting.

EASY COOK

A time-saving pad, this simplified
control lets you quickly set and start
microwave cooking without the need
to touch START.
Example: To set EASY COOK for 2
minutes.
Touch EASY COOK
4 times.
The oven begins
cooking and display
shows time counting
down.
NOTE:
If you touch EASY COOK, it will add
30 seconds up to 3 minutes; after 3
minutes, every touch will add 1
minute up to 99 minutes 59 seconds.
10

TIME COOK

TIME COOK
This function allows you to cook food
for a desired time. And in order to
give you the best results, there are
10 power level settings in addition to
HI-POWER because many foods
need slower cooking (at less than HI-
POWER).
Example: To cook food on 80%
Power (power 8) for 5 minutes 30
seconds
1. Enter 5 minutes
30 seconds by
touching [5], [3]
and [0],
2. Touch POWER
LEVEL. P-HI
appears in the
display. This is to
tell you that the
oven is set on HI
unless a different
power setting is
chosen.
3. Touch [8].
To select power
level 80%.
Display scrolls the
words P-80.
4. Touch START.
When the cooking time is over, two
short and one long tone sounds.
The word End shows in the display
window. Then the oven shuts itself
off.
NOTE:
If you do not select the power level,
the oven will operate at power
HIGH. To set HI-POWER cooking,
skip steps 2 and 3 above.