Panasonic CQ-VA707N Operating Instructions Manual page 60

Connecting the Parking Brake Connection Lead
Caution: For safety, be sure to ask your nearest professional installer to do this connection.
Parking Brake
Parking Brake Connection Lead
q Attach a clip connector !4 to the end of the
parking brake connection lead.
Comes up to this point
Parking Brake Connection Lead (Blue w/yellow stripe)
Connecting the Reverse Cord
* In case using an optional rear-view camera, the reverse lead must be connected.
¡Connect the reverse lead (violet w/white stripe) to the positive (+) lead of the reverse lamp (the lamp with
a clear lens that lights when the transmission gear is shifted into the reverse position).
Check the reverse lamp.
* Take it out of the back of the tail lamp mount.
Note: Connect the reverse lead after cutting the terminal at the end.
Parking Brake Switch
SIDE BRAKE
(Blue w/yellow stripe)
Side Brake (parking brake) Connection Lead
When the parking brake lever is engaged, the unit is grounded by the chassis.
REVERSE
Reverse Lead
(Violet w/white stripe)
Foot Brake
The parking brake switch position
varies with the vehicle model.
!4 C lip Connector
Brake Light
w The clip connector !4
power source side lead of the parking brake
lever.
Reverse Lamp
Clip Connector
!3 R everse
Extension Cord
+
–
Battery
Vehicle Chassis
is connected to the
Power Source Side Lead
+ -
Battery
Car Body
P
R
N
D
2
L
Transmission Gear
CQ-VA707N
E
N
G
L
I
S
H
58
61