Cd Changer Basics - Panasonic CQ-VA707N Operating Instructions Manual

CD Changer Basics

E
¡An optional changer (CX-DP88N, for example) must be connected.
N
¡Use of the optional Dual CD Changer Control Unit (CA-CD55EN) allows you to con-
G
L
nect two CD changers (dual changers). (
I
¡When the unit is connected with a CD text recognizable CD changer (CX-DP9061EN,
S
for example), CD text can appear on the display.
H
41
MUTE
TRACK
DISC/BAND
NAVIGATION
MODE MODE NAVI
CHz CHx
1 2
RANDOM SCAN
4 5
TA AF
ASPECT
A
LOC
Car AV
[MODE]
TR1 VTR2 CH·C TV
MODE MODE MODE MODE
PWR PWR PWR 7.0'' WIDE COLOR LCD MONITOR WITH R 7.0'' WIDE COLOR LCD MONITOR WITH R 7.0'' WIDE COLOR LCD MONITOR WITH RECEIVER
[MODE]
44
Starting the CD Changer
Once the CD changer has been connected, press [MODE] to change
to the CD changer mode as follows.
PWR
Notes:
ENTER
¡The CH
if no changer is connected.
¡If no disc is in the magazine, "NO
DISC" appears.
MENU
TITLE ¡If the magazine is inserted while
3 3
power is on, the CH
REPEAT
automatically selected to start
6
playing.
PTY
¡If the navigation mode is ON, only
OPEN/CLOSE
the audio signal is switched while the video signal remains as it is.
¡The mode can be changed even when the display unit is in the
retracted position.
[3](TITLE)
Title Display
Track title or disc title appears on the display only when the unit is
connected to a CD changer that can recognize CD text (CX-
EO
DP9061EN, for example).
TILT TILT TILT
OPEN/ OPEN/ OPEN/CLOSE
Press [3](TITLE) to switch the display between disc title and track title.
(Only for remote control)
Notes:
¡"NO TITLE" appears on the display if a disc, which does not support
the text display, has been loaded.
¡Up to 12 characters can be displayed at a time.
¡If the text has more than 12 characters, it is shown with up to 48
characters just once by scrolling, then the first 12 characters are
kept displayed.
CQ-VA707N
page 60)
a
FM/AM(LW/MW)
CH C
•
(Changer Control)
C mode is not available
•
C mode is
•
VTR1
VTR2
Disc Number Track Number