Auxiliary - Panasonic CQ-VA707N Operating Instructions Manual

Auxiliary

E
¡Watching the Image or listening to the sound of a connected external device
N
¡Connect a mobile video deck, video camera, rear-view camera, or car navigation
G
system, for example.
L
I
S
WARNING:
H
For safe driving, the operation is possible only when stopped with the parking brake engaged. "WARN-
ING" will be displayed, if you try to switch to VTR1 or VTR2 mode by pressing the [MODE] button while
45
driving.
Notes:
¡If your car navigation system is not connected, be sure to set the NAVI (navigation input) to RGB on
the setting/ adjusting menu.
¡If your rear-view camera is not connected, be sure to set the CAMERA to OFF on the setting/adjust-
ing menu. (a
MUTE
TRACK
DISC/BAND
NAVIGATION
MODE MODE NAVI
CHz CHx
1 2
RANDOM SCAN
4 5
TA AF
ASPECT
A
LOC
Car AV
[MODE]
TR1 VTR2 CH·C TV
MODE MODE MODE MODE
PWR PWR PWR 7.0'' WIDE COLOR LCD MONITOR WITH R 7.0'' WIDE COLOR LCD MONITOR WITH R 7.0'' WIDE COLOR LCD MONITOR WITH RECEIVER
[MODE]
Notes:
¡In VTR1 mode, the video and audio from the external device connected to VTR1-IN are selected.
¡In VTR2 mode, the video and audio from the external device connected to VTR2-IN are selected.
¡If the navigation mode is ON, only the audio signal is switched while the video signal remains as it is.
page 33)
¡The mode can be changed even when the display unit is in the retracted position.
48
(a page 22)
page 22)
VTR Mode
Press [MODE] to change to VTR1 mode or VTR2 mode as follows.
PWR
ENTER
(Changer Control)
The image supplied by a connected external device is displayed. At
MENU
the same time, the VTR1 or VTR2 indicator on the front panel of the
TITLE
display unit lights.
3
REPEAT
6
PTY
OPEN/CLOSE
Control Unit
(Front)
Emergency
EO
Announcement
TILT TILT TILT When an emergency announcement
OPEN/ OPEN/CLOSE OPEN/
is received in VTR mode, "ALARM!"
lights and that announcement can be
heard.
CQ-VA707N
FM/AM(LW/MW)
CH C
•
VTR1-IN
R L VIDEO
R L VIDEO
VTR2-IN
VTR1
VTR2
Example of VTR1 mode
ALARM indicator
(a