Panasonic CQ-VA707N Operating Instructions Manual page 50

Installation Precautions
This product should be installed by a professional installer, if possible.
In case of difficulty, please consult your nearest authorized Panasonic Service Center.
1. This system is to be used only in a 12-volt, DC battery system (car) with negative ground.
2. Follow the electrical connections carefully
the unit.
3. Connect the power lead after all other connections are made.
4. Be sure to connect the battery lead (yellow) to the positive terminal (+) of the battery or fuse block (BAT)
terminal.
5. Insulate all exposed wires to prevent short circuiting.
6. Secure all loose wires after installing the unit.
7. Please carefully read the operating and installation instructions of the respective equipment before con-
necting it to this unit.
Caution: Please follow the laws and regulations of your province or country for installation of the unit .
(a pages 55 to 61). Failure to do so may result in damage to
CQ-VA707N
E
N
G
L
I
S
H
48
51