Standards - ADS-tec IWL3000 series User Manual

IWL3000 series

2.8 Standards

This device is compliant with the provisions and safety objectives of the following EU directives:
Standards
 This device is compliant with the CE mark test requirements as defined in the
European test standards EN 55022 and EN 61000-6-2
 This device is compliant with the DIN EN 60950 (VDE0805, IEC950) testing
specifications on "Information technology equipment – Safety"
 This device is compliant with the DIN EN 60068-2-6 testing specifications
(sinusoidal vibration)
 This unit is compliant to the DIN EN 60068-2-27 (shock and bump) testing
specification
 This unit is compliant to DIN EN 300 328 V1.8.1 (2,4 GHz) and
DIN EN 301 893 V1.7.1 (5GHz)
Recommendation for use:
A corresponding declaration of conformity is available for competent authorities at
the manufacturer and can be viewed upon request.
For full compliance with the EMC legislation, all components and cables
used for device connection must also be compliant with these requirements.
It is therefore necessary to employ BUS and LAN cables with shielded
connectors and these must be installed as per the instructions contained in
the instruction manual.
© ads-tec GmbH • Heinrich-Hertz-Str. 1 • D-72622 Nürtingen
7