Mounting Options - ADS-tec IWL3000 series User Manual

IWL3000 series

5.2 Mounting options

The device is designed for table mounting, wall mounting and for top-hat rail mounting.
5.2.1 Table mounting
Remove the protective foil on the rubber feet and attach them at the marked positions.
Fig. 1:
5.2.2 Wall mounting
Alternatively, the device can be mounted according to the VESA 75 standard on a suitable mounting
surface.
Fig. 2:
Information:
For mounting, use M4 screws of a suitable length.
The usable blind hole depth of the mounting holes is 6mm.
© ads-tec GmbH • Heinrich-Hertz-Str. 1 • D-72622 Nürtingen
17