Table of Contents
Advertisement
IWL3000 series
5.2.3 Top-hat rail mounting
The device is set at an angle from the top of the rail. (1) and is fixed by gently pressing on the bottom
(2). The device must be felt to snap into the rail.
Fig. 3:
To release the device from the DIN rail, proceed in reverse order.
Information:
Make sure not to damage the mounting rail of the unit when removing it..
© ads-tec GmbH • Heinrich-Hertz-Str. 1 • D-72622 Nürtingen
18
Advertisement
Table of Contents
