Manual Configuration Of The Network Adapter - ADS-tec IWL3000 series User Manual

IWL3000 series

7.2 Manual configuration of the network adapter

Information:
The procedure described in the following was prepared using the Microsoft
Windows XP professional® operating system as an example. If you are
using another operating system, the paths and properties described here
may vary.
Open the properties map for your network adapter. The relative path is as follows:
Network connections> LAN connection> Properties (right mouse-key).
In the dialogue tab that appears, select option: Internet protocol (TCP/IP) and then click on
Properties.
Fig. 8:
Now select: Use the following IP address
Access to the device is only enabled if the following parameters are entered as the fixed IP address or if
the computer is located in the same subnet space:
IP ADDRESS: 192.168.0.100
© ads-tec GmbH • Heinrich-Hertz-Str. 1 • D-72622 Nürtingen
28