IBM DS4800 User, Installation And Maintenance Manual page 52

3. Remove the mounting rails, mounting hardware, and line jumper cords from the
4. Assemble the tools and equipment that you will need for installation. These
30
IBM System Storage DS4800 Storage Subsystem: Installation, User's, and Maintenance Guide
≥ 18 kg (39.7 lb)
CAUTION:
Use safe practices when lifting.
DS4800 shipping box. Do not remove the DS4800 from the shipping box at this
time.
Attention: The mounting rails, mounting hardware, and line jumper cords may
be packed beneath the DS4800 in the shipping box. To remove these items
from the shipping box without first removing the DS4800, open the two long
sides of the shipping box. Then open and fold flat the two short sides of the
shipping box. This enables you to access the mounting rails, mounting
hardware, and line jumper cords without first removing the DS4800 from the
shipping box.
After you open the DS4800 shipping container and remove the mounting rails,
mounting hardware, and line jumper cords, check the remaining contents (see
"Inventory checklist" on page 3) without removing the DS4800 from the shipping
box. If any items are missing, contact your IBM reseller before proceeding.
include:
v Region-specific power cords required for the DS4800
v 5/16 (8 mm) hex nut driver
v Medium flat-blade screwdriver
v Antistatic protection (such as a grounding wrist strap)
v Fibre channel and Ethernet interface cables and cable straps
v SFP modules
v The line cord jumper power cords that are shipped with the DS4800
v The rack-mounting hardware that ships with the DS4800
v The appropriate host software kit for your operating system.
Depending on the DS4800 model you order, your DS4800 will ship with either
the Microsoft Windows host software attachment kit or with your choice of
host software kits (Windows, AIX, Linux, Netware, SUN Solaris, HP-UX, Linux
on POWER, or VMware). The host software kit grants you permission to
attach host servers using the appropriate operating system to the DS4800.
The kit includes a DS4000 Storage Manager Version 9.16 Support CD that
has the appropriate IBM DS4000 Storage Manager host software. If you
order more than one host software kit, the additional kits may also be
shipped in the DS4800 shipping box.
The CD also includes the DS4000 Storage Subsystem controller firmware
06.15. Controller firmware version 6.16.xx.xx files, which are required to
enable the attachment of EXP810 enclosures, is in the DS4000 Storage
Subsystem Controller Firmware and IBM documentation Version 6.16 Support
for DS4000 EXP810 Fibre Channel Storage Expansion Enclosure that is
shipped with each of the EXP810 enclosures. You must upgrade the
controller to this version before upgrading the controller with a newer version
≥ 32 kg (70.5 lb) ≥ 55 kg (121.2 lb)