Table of Contents
Advertisement
SYSTEM INCLUDES:
4 CHANNEL DVR
OWNER'S
MANUAL
CHECK YOUR PACKAGE TO MAKE SURE THAT YOU RECEIVED THE COMPLETE
SYSTEM, INCLUDING THE COMPONENTS SHOWN ABOVE.
GETTING STARTED:
1.
Connect the AC Power Cord to the Power Adapter and plug
into an electrical outlet. Connect up to 4 cameras to the 6
Pin DIN or BNC Video inputs on the back of the DVR. Turn
the Main Power Switch to ON. The Red LED indicator will
illuminate and the DVR will be in the standby mode
2.
Upon Powering Up, a message will appear "Please Check
HDD Key Lock before Turn ON". This message is reminding
you to ensure that the cabinet of the DVR is locked before
proceeding.
3.
The check of the HDD key lock will be followed by an overall
diagnostic check of the HDD . The screen will appear as
shown to the right:
Note: The system is only checking for a MASTER HDD. If you have connected a SLAVE HDD on the
back of the DVR, refer to page 11 for instruction on how to enable your system to recognize it.
Note: If you get a "FAIL" message in HDD Auto Detect, the HDD is not installed correctly. Make sure
that you set the hard drive to MASTER Refer to Appendix #1 if you encounter this problem, as you will
have to properly insert the HDD.
2 KEYS FOR
CARTRIDGE
80 GB HARD DISK DRIVE
(HDD)
INTERNET SECURITY
SOFTWARE
Please refer to the Quick Start
Guide and on-line manual for the
Digital Video Monitoring software,
and for more information on
Remote Monitoring
Note: This software must be
installed on a PC before
connecting the USB cable
*** MASTER HDD ***
HDD AUTO DETECT.......OK
HDD R/W CHECK...........OK
HDD SPACE ( xxxGB).......OK
MODEL# XXXXXXXXXX
-3-
Advertisement
Table of Contents
