Table of Contents
Advertisement
System Contents
The DXR116 box should include the items listed below. Please take a moment to verify that no items are missing from the
package.
DXR116 Digital Video Recorder
Installation / User Manual
NOTE:
KEEP THE KEYS IN A SAFE PLACE. THEY ARE NECESSARY FOR INSTALLATION / REMOVAL OF THE HARD
DISK DRIVE.
Getting Started
If the purchased DVR model did not contain a hard disk drive, please refer to Appendix #1 for HDD installation
instructions.
1.
Connect video sources and monitor(s) following the configuration example shown in
2.
Connect the AC Power Cord to the Power Adapter and plug into an electrical outlet. A Red LED indicator light will be
ON to indicate that the DVR is in Standby mode.
3.
Press the Power button. The POWER LED will turn from red to orange, and other red LED indicators will turn ON.
Note: the system takes approximately 5 to 15 seconds to power up. During the power-up, you will see the following
messages: "HDD Detecting", followed by "Master HDD Connected".
Once connected, the POWER LED will change to green, and red indicator lights be ON next to the Alarm and Timer buttons.
NOTE:
IF YOU GET THE MESSAGE "HDD NOT FOUND", PLEASE SEE APPENDIX #1 AS THE HDD IS LIKELY NOT
INSTALLED CORRECTLY.
2 Keys for
Hard Drive Cartridge
6
Hard Disk Drives
(not included in all models)
Power Adapter and Cord
Appendix #
2.
Advertisement
Table of Contents
