Philips GC2078 series User Manual page 9

Set the steam control back to
8
Note: Repeat the Calc-Clean process if the water that
comes out of the iron still contains scale particles.
After the Calc-Clean process
Put the iron on the base. Let the iron heat up to dry the
1
soleplate.
Take the iron from the base when the light ring turns
2
steady blue.
Move the iron gently over a piece of cloth to remove any
3
water stains on the soleplate.
Storage
Set the steam control back to
1
Pour out any remaining water from the water tank.
2
Unplug the mains cord and wind the mains cord around
3
the base. (Fig. 16)
Remove iron from the base when you wind the cord, as the
soleplate could still be hot.
Put the iron on the base. Lock the iron to its base. (Fig.
4
17)
Let the iron cool down before you store it.
5
You can carry the iron and base by the iron handle. (Fig. 18)
Troubleshooting
This chapter summarises the most common problems you
could encounter with the appliance. If you are unable to
solve the problem with the information below, visit www.
philips.com/support for a list of frequently asked questions
or contact the Consumer Care Centre in your country
(see the worldwide guarantee leaflet for contact details).
ENGLISH
. (Fig. 2)
. (Fig. 2)
11