Philips GC2078 series User Manual page 6

ENGLISH
8
Place the iron on its base and connect the base to a
3
power socket. (Fig 6.)
Note: Make sure that the base sits on a stable and level
surface. It is recommended to place the base on the soft
part of the ironing board.
The light ring starts to flash blue light, indicating the iron
4
is heating up. (Fig 7.)
When the blue light turns steady, you can start ironing.
5
(Fig.8 )
Operation of Smart Charging base
The iron is equipped with Smart Charging base. The light
will indicate the status of the iron, and remind you to
charge the iron after 20 to 25 seconds to ensure a good
wrinkle removal performance. Please refer to table 2 for
the operation of the base.
Note: to ensure good wrinkle removal performance, always
put the iron on its base during the resting period. Do not
place the iron on its heel. (Fig.9)
Table 2
Light status
Flashing blue
Steady blue
Flashing
orange
Slow
breathing blue
(specific types
only)
Iron status
Heating up
Ready for use
The iron needs to
be charged now
Safety auto-
off has been
activated
Instructions
Wait for iron to be
ready.
You can start ironing.
Put the iron back to
the base to charge it.
Refer to Chapter
"Features", section
"safety auto-off".