Table of Contents
Advertisement
A.
In CL1 mode, press the Mode button to confirm your settings and
return to the wireless master summary screen. At this point, the
VS-570's wireless TTL master setup will be complete, and you
will be ready to start shooting.
B. In CL2 mode, continue with step 9 below.
9.
Press the Mode button so the group B ratio indicator appears
onscreen. Use the up or down navigation buttons to set the ratio value
to - (off), 1, 2, 4, or 8.
10. Confirm your settings. Press the Mode button to return to the wireless
master summary screen. At this point, the VS-570's wireless TTL master setup will be complete, and you
will be ready to start shooting.
A
9
Using the VS-570 as a Wireless Master
|
33
Advertisement
Table of Contents
