Headlight - BMW R1200S Rider's Manual

High-beam headlight is
switched on.
Move switch 1 for high-
beam headlight to center
position.
High-beam headlight is
switched off.
Press bottom part of
switch 1 for high-beam

headlight.

High-beam headlight is
switched on as long as
switch is pressed (headlight
flasher).
Switching on parking
light
Switch off ignition.
You can switch on the
parking lights only imme-
diately after switching off the
ignition.
Press and hold left turn in-
dicator switch 1 until side
light is switched on.
Switching off parking
light
Switch on ignition.
Parking light switched off.

Headlight

Adjusting headlight for
RHD/LHD traffic
When riding in countries
where traffic drives on the op-
posite side of the road to that
in which the motorcycle was
registered, the asymmetrical
low headlight beam will dazzle
oncoming traffic.
Have the headlight adjusted
to the relevant conditions by a
specialized workshop, prefer-
ably an authorized BMW Mo-
torrad retailer.
Ordinary adhesive tape
damages the plastic
lens.
To prevent damage to the
plastic lens, consult a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.
Headlight range and
spring preload
The headlight range gener-
ally remains constant due to
the adjustment of the spring
preload to the loading state.
Spring preload adjustment
may only be insufficient when
the motorcycle is very heav-
4
39
z