BMW R1200S Rider's Manual page 84

Place motorcycle on an
7
auxiliary stand; BMW Mo-
torrad recommends BMW
82
Motorrad rear wheel stand.
Installing rear wheel stand
( 84)
Shift into first gear.
z
Remove the 5 studs 1 from
the rear wheel while sup-
porting the wheel.
Remove lock washer 2 of
rear wheel stand if neces-
sary.
Lower rear wheel to ground.
Roll rear wheel out toward
rear.
Installing rear wheel
Threaded fasteners not
tightened to the speci-
fied torque can work loose or
their threads can suffer dam-
age.
Always have the tightening
torques checked by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.
Make sure that the wheel
mount and wheel hub are
grease-free.
Place the rear wheel on the
wheel mount.
Remove lock washer 2 of
auxiliary stand if necessary.
Screw in the wheel studs 1
hand-tight and tighten di-
agonally with appropriate
torque.
Rear wheel on wheel
carrier
44 lb/ft (60 Nm)
Tightening sequence: Diago-
nally
Remove auxiliary stand.