Yamaha EMX7 Manual page 8

Serious Live Sound Capability
Plus Innovative Digital Features
Flagship EMX model with fader
•
500W + 500W Output Power (4 )
•
Up to 12 Mics, 16 Inputs Total (8 Mono/Mic, 4 Stereo)
•
Dual SPX Sends
•
FRC (Frequency Response Correction) System
•
Feedback Suppressor
•
9-band Digital Graphic EQ with Presets & Memory
•
Versatile 16-Input Configuration Adapts to
Varied Source Requirements
The EMX5016CF has a total of 16 input channels – eight for monaural
microphone or line input plus four stereo pairs which can function
either as monaural microphone inputs or stereo line inputs giving you
more options if your sources are mostly microphones. If you need to
handle more stereo sources the EMX5016CF will comfortably handle
four pairs in addition to eight monaural microphone or line inputs.
Switchable phantom power is provided for all microphone inputs.
Advanced Channel EQ
3-band EQ is available on all input channels, but extra versatility is
provided on the eight mono channels with mid-frequency sweep
controls. The mid EQ center frequency can be continuously swept from
250 Hz through 5 kHz so you can precisely pinpoint frequencies in the
critical midrange that require compensation, providing signi cantly
enhanced equalization potential.
Ample I/O for Expansion and Integration
The EMX5016CF features a range of inputs and outputs that allow it to
be expanded with external gear or integrated into larger systems.
Insert patch points on the mono input channels, for example, let you
add outboard signal processing to individual input channels, while
external AUX and EFFECT sends allow you to route the mixer's signals
to external signal processing and/or monitor systems. Stereo out,
stereo sub-out, and record outputs are also provided.
1-knob COMP on Mono Channels
The EMX5016CF features compressors on all monaural microphone/line
channels that can help to make vocals ride the mix better, give you that
smooth compressed guitar sound, deliver more punchy bass, and
generally re ne your mixes in a multitude of ways. These unique 1-knob
COMP are surprisingly simple to use. There are no multiple attack,
threshold, makeup gain, and other controls — just set the COMP control
to the amount of compression you need.
7
FRC (Frequency Response Correction) System
Setting a live sound system's output equalizer to optimally match room
response is normally a complicated process but he EMX5016CF
handles the entire process automatically, Simply set up a microphone in
an appropriate location, connect it to channel 1, press
MEASURE/CORRECT once to make the measurement, and then again
to automatically set the graphic equalizer for optimized response. The
EQ setting can then be stored in one of the user memories for later recall.
Automatic Feedback Suppression
The EMX5016CF provides a dedicated Feedback Suppressor function
that detects feedback frequencies on the stereo bus and applies
precise notch lters to eliminate the feedback. It has an AUTO mode
that automatically keeps track of and attenuates feedback frequencies
for you, and a sensitive manual mode that lets you pinpoint and
attenuate individual feedback points.
Multi-band "Maximizer"
The EMX5016CF "Maximizer" is an advanced 3-band compressor that
can be applied to the stereo bus for a more punchy "up-front" overall
sound. Simply press the MAXIMIZE switch to instantly give the
mix more presence and impact without sacri cing musical subtlety.
Dimensions
444 (17 3/8)
(440 (17 5/16) excluding screw heads)
unit: mm (inch)
155 (6 1/8)
444 (17 3/8)
(440 (17 5/16) excluding screw heads)