I Image Adjustment
You can manually adjust the pan/tilt/azimuth angles,
focus, and zoom while observing the connected moni-
tor.
Variable angles
plus or minus 75 °
(max.)
Pan lock screw
(stainless)
Panning table
Notes:
• Do not hold the camera by lens unit to adjust pan-
ning, tilting, or azimuth.
• The video output to the BNC will be interrupted
while an LCD monitor is connected to the video
jack.
Tilting lock screw
(stainless)
-16-
1. Connect an LCD monitor to the video jack.
2. Pan/tilt/azimuth adjustment
• Loosen the two screws locking the pan and tilt
tables.
• Pan and tilt the table to aim the camera at what you
need to watch.
• Turn the azimuth adjuster to obtain a level image.
• Tighten the two screws after adjusting.
Azimuth adjuster