Panasonic WV-CW240S Operating Instructions Manual page 13

2. Remove the two red-coloured screws provided for
transport protection using a Philips screwdriver.
2nd transport
protection screw (Red)
G Heater unit installation
See OPTIONAL HEATER UNIT for details.
Adhesive tape
Fold
Point "A"
(inside the wall)
Supplied screw
Harness
G Mounting the camera
1. Fix the camera to the installation surface.
WV-CW244FE
• Fix the attachment on the surface using four
screws (locally procured).
• Place the camera on the attachment and rotate
it clockwise.
• Fasten the camera lock screw.
WV-CW240S
• Fix the bracket on the surface using four
screws (locally procured).
• Fix the attachment on the bracket using four
screws (supplied).
• Place the camera on the attachment and rotate
it clockwise.
• Fasten the camera lock screw.
2. Perform connections referring to I Connections.
3. Reinstall the camera to the bracket or attachment
referring to step 1 above.
4. Adjust the image referring to I Image Adjustment.
5. Apply waterproof means referring to G Waterproof
Process.
-13-