Get Started; Install Filters - Philips AC4372 User Manual

3 Get started

Install filters
The appliance comes with all filters fitted
inside, but you have to remove the packaging
of the filters before you can use the appliance.
Remove all filters, unpack them, and place them
back into the appliance as described below.
Note
•
Insert the filters in the correct position.
1
Place your fingers in the recesses of the
side panels and gently pull the top part of
the front panel towards you.
2
Lift the hooks at the bottom of the panel
out of the bottom of the appliance.
3
To remove the pre-filter, grab the two
projections and pull the filter towards you.
8 EN
4
Remove all the filters from the appliance.
5
Remove all packaging material from the
filters.
6
For AC4372, put the HEPA filter, activated
carbon filter and multi-care filter back into
the purifier.