Timer And Sleep Operation - Sharp CD-ES111H Operation Manual

CD-ES111H
ENGLISH
E-23
Downloaded From DvDPlayer-Manual.com Sharp Manuals
Timer and sleep operation (continued)
Sleep operation
1
Play back the desired sound source.
2
Press the TIMER/SLEEP button repeatedly until "SLEEP" is
displayed and then within 8 seconds, press the MEMORY/
SET button.
To change the sleep time:
Whilst the sleep time is displayed, press the TUNING/TIME (
or ) button.
(Maximum: 3 hours - Minimum: 5 minutes)
3:00 2:00 1:30
(cancel) 0:05 0:10 0:15
3
Within 30 seconds, press the MEMORY/SET button.
4
Your system will enter the power stand-by mode automat-
ically after the preset time has elapsed.
The volume will turn down 30 seconds before the sleep opera-
tion finishes.
To cancel the sleep operation:
Press the ON/STAND-BY button whilst the sleep timer is set.
To confirm the remaining sleep time:
Press the TIMER/SLEEP button whilst the sleep timer is set.
The remaining sleep time is displayed for about 8 seconds.
To use timer and sleep operation together
Example: To fall asleep and wake up to the same radio station
You can play back the same source only (the function cannot be
switched).
1
Set the sleep time (see left, steps 1 - 3).
2
Whilst the sleep timer is set, set the desired playback time
(steps 4 - 6, pages 21 - 22).
Sleep timer setting
5 minutes - 3 hours
Sleep operation will
1:00
automatically stop.
Caution:
0:30
When using the cassette deck, be sure the tape length is long
enough to perform both functions. If you want to sleep and wake up
listening to a tape, and the length of the tape is shorter than the sleep
timer setting, timer playback will not be possible.
03/10/29 CD-ES111H(H)E.fm
Timer playback setting
Timer playback
start time
TINSZA004SJZZ
4