Sharp CD-ES111H Operation Manual page 15

Connect the black wire to the minus (-) terminal, and the red wire to
the plus (+) terminal.
Caution:
4
Note:
The speaker grilles are not removable.
After checking all the connections have been made correctly, con-
nect the AC power lead to the AC power input socket, then plug the
AC power lead of this unit into the wall socket. If you plug in the unit
first, the unit will enter the demonstration mode.
Notes:
Downloaded From DvDPlayer-Manual.com Sharp Manuals
Speaker connection
Use speakers with an impedance of 8 ohms
or more, as lower impedance speakers can
damage the unit.
Do not mistake the right and the left chan-
nels. The right speaker is the one on the right
side when you face the unit.
Do not let the bare speaker wires touch
each other.
Do not allow any objects to fall into or to be
placed in the bass reflex ducts.
Do not stand or sit on the speakers. You may
be injured.
Connecting the AC power lead
Unplug the AC power lead from the wall socket if the unit will not
be in use for a prolonged period of time.
Never use a power lead other than the one supplied. Otherwise, a
malfunction or an accident may occur.
Demonstration mode
The first time the unit is plugged in, the
unit will enter the demonstration mode.
You will see words scroll.
To cancel the demonstration mode:
When the unit is in the power stand-by mode (demonstration mode),
press the X-BASS/DEMO button. The unit will enter the low power
consumption mode.
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the X-BASS/
DEMO button again.
Note:
Incorrect
When the power is on, the X-BASS/DEMO button can be used to
select the extra bass mode.
To turn the power on
Press the ON/STAND-BY button to turn the power on.
After use:
Press the ON/STAND-BY button to enter the power stand-by
mode.
03/10/29 CD-ES111H(H)E.fm
CD-ES111H
ENGLISH
8
E-8
TINSZA004SJZZ