Period 1: Finish Time; Period 1: Set Temperature; Period 2: Start Time; Period 2: Finish Time - Masport ECS II Series Owner's Manual

4 • PERIOD 1: FINISH TIME. Press and release the
PROG button. The display will show OFF, the ROOM
TEMP, MO, PROG 1 and the finishing time of Monday's
period 1. The '+' and '–' buttons can be used to adjust the
finishing time as described in the previous paragraph.
5 • PERIOD 1: SET TEMPERATURE. Press and release
the PROG button. The display will show ON, SET PROG 1,
MO and the set temperature for Monday's period 1. The '+'
and '–' buttons can be used to adjust the set temperature of
period 1.
6 • PERIOD 2: START TIME. Press and release the PROG
button. The display will show ON, MO, the ROOM TEMP,
PROG 2 and the starting time for Monday's period 2. The
'+' and '–' buttons can be used to adjust the starting time as
described in step 3 above. In order to avoid overlap of the
periods, take care to ensure period 2 does not commence
before period 1 has finished.
7 • PERIOD 2: FINISH TIME. Press and release the PROG
button. The display will show OFF, MO, the ROOM TEMP,
PROG 2 and Monday's period 2 finishing time. The '+' and
'–' buttons can be used to adjust the finishing time as before.
8 • PERIOD 2: SET TEMPERATURE. Press and release
the PROG button. The display will show ON, MO, SET
PROG 2 and the SET temperature for Monday's period 2.
The '+' and '–' buttons can be used to adjust this as before.

PROGRAMMING SUBSEQUENT DAYS.

YOU NOW HAVE TWO OPTIONS. The first option programs each day independently, while the
second allows Monday's entire program to be 'copied' to one or more other days of the week.
Whether you take the first or second option, you must move directly to it after completing step 8
above. A delay of more than 20 seconds will end the programming procedure.
MO
MO
MO
MO
MO
6
OFF
PROG 1
FLASHING
ON
FLASHING
SET PROG 1
OFF
PROG 2
FLASHING
OFF
PROG 2
FLASHING
ON
FLASHING
SET PROG 2