Table Of Contents - Masport ECS II Series Owner's Manual

Symbol indicates that a signal
is being sent to the receiver.
Calendar shows the present day or
the day selected while programming.
ROOM / SET display shows
whether the temperature displayed
is the actual or required temperature
MANUAL / AUTO / PROG indicates
which mode is in use.
Flame symbol indicates
required flame size.
ON / OFF button activates and
de-activates the remote control.
Advances hours when setting the clock
or programming - advances the day
when setting the calendar - increases
the flame height in MANUAL mode -
increases the SET temperature in
AUTO and PROG modes.
Steps through modes MANUAL
> AUTO >PROG > MANUAL etc.
Initiates programming - steps through
the programming routine - displays
the program step by step.
CONTENTS:
Introduction.....................................................................2
Setting the Time and Day.................................................2
Teaching the Receiver......................................................2
MANUAL MODE ...........................................................3
AUTO MODE .................................................................4
PROGRAM Mode ...........................................................5
Programming ...........................................................5, 6, 7
Low Battery.....................................................................7
Fahrenheit Temperatures..................................................7
ECS II CONTROL SYSTEM
Operating in MANUAL Mode ..............................4
Operating in AUTO Mode ....................................5
Period 1: Start time...............................................5
Period 1: Finish time .............................................6
Period 1: Set temperature......................................6
Period 2: Start time...............................................6
Period 2: Finish time .............................................6
Period 2: Set temperature......................................6
Programming subsequent days ..........................6, 7
Reviewing the program .........................................7
Operating in PROG Mode.....................................7
ON/OFF shows the activity status of
the remote in MANUAL & AUTO modes
- indicates the start and finish of
periods when programming.
Battery symbol flashes when
batteries are low.
Temperature display shows ROOM
temperature or required SET temp.
in AUTO and PROG modes.
Temperature units - Celsius or
Fahrenheit as desired. Switchable.
Fan symbol with fan speed
indication lines.
Clock shows present time or start and
finish times when programming.
Temperature sensing bulb.
Advances minutes when setting clock
or programming - retreats day when
setting calendar - decreases flame
height in MANUAL mode -decreases
SET temp. in AUTO mode or while
programming - confirms copying
one day's program to another.
Hold for three seconds to start clock
setting, then press for calendar setting.
Steps through fan settings -
LOW > MED > HIGH > OFF > LOW etc.
1