Removal Of The Front Panel; Removal Of The Pcb Unit; Removal Of The Surge Arrestor - Rinnai REU-VR1620WG Service Manual

IMPORTANT
For some areas of dismantling you may need to
isolate any or all of the following:
* Isolate gas supply.
* Disconnect electrical supply from wall socket.
* Isolate water supply.
* Drain all water from appliance.

1) Removal of the Front Panel

a. Remove (4) four screws.

2) Removal of the PCB Unit

a. Remove the front panel. (Refer Item 1.)
b. Remove (1) one PCB unit fixing screw and pull out
forward.
REU-VR1620WG / REU-VR1620WB / REU-VR1620WS / REU-VR2024WG- 30 -

3) Removal of the Surge Arrestor

Issue 2 - 19/01/11 ©Rinnai