Table of Contents
Advertisement
Submenu items
•
Off: C losing the LCD screen turns off the camcorder.
Min: C losing the LCD screen starts the Quick On STBY
•
mode after a short period of time. The camcorder
stays in Quick On STBY mode for 5 minutes and
then turns off unless you open the LCD screen or
push a button.
•
We recommend turning off the camcorder after use to reduce energy
consumption.
However, as an alternative, you can use the Quick On STBY function
under most shooting conditions to reduce energy consumption
effectively.
•
The mode indicator keeps blinking in the Quick On STBY mode.
•
The Quick On STBY mode is not available under the following
conditions:
- When the LCD screen is open.
- When a video cable (HDMI, Audio/Video cable) or the USB cable
is connected to the camcorder.
- When you operate the buttons on the camcorder.
Downloaded From VideoCamera-Manual.com Manuals
PC Software
If you set PC Software to On, you can use the PC software built into
the camcorder (Intelli-studio) by connecting your camcorder to your
PC using the camcorder's USB cable. You can download the video
and photo images stored on the camcorder to your PC's hard disk
and edit the videos and photos using the internal PC software.
1.
Touch the Menu (
) Setting
( ) tab "PC Software."
2.
Touch the desired submenu item.
3.
To exit the menu, touch the Exit
(
) or Return (
) tab.
Submenu items
•
Off: Disables the PC Software function.
•
On: T he internal editing software starts when you connect
the camcorder to a PC.
•
The PC Software function is not available under the following
conditions:
- If "USB Connect" is set to "PictBridge"
•
To enable the PC Software function, set "USB Connect" to "Mass
Storage," in the system setting menu option. page 84
•
The PC Software is compatible with the Windows operating systems
only.
System setting
PC Software
Off
On
1/1
Advertisement
Chapters
Table of Contents
