Using The Intelli-Studio Programme - Samsung HMX-H300BP User Manual

USING THE Intelli-studio PROGRAMME

Intelli-studio is a built-in programme that allows you to play back
and edit files. You can upload files to web sites, such as YouTube
or Flickr. For details, select "Help"  "Help" on the Intelli-studio
screen.
Step 1. Connecting the USB cable
1
Set "USB Connect: Mass
Storage" and "PC Software:
On".
These are the default settings.
•
2
Connect the camcorder to a PC
with the USB cable.
A new file saving window
•
appears along with the Intelli-
studio main window. If your
camcorder has no new files,
the pop-up window for saving
new files will not appear.
Depending on your version of Windows, the Windows
•
removable disk window may also appear.
Downloaded From VideoCamera-Manual.com Manuals
PC Software
Off
On
1/1
Using with a Windows computer
To disconnect the USB cable
To disconnect the USB cable after completing the file transfer, you
must follow these steps:
1. Click the "Safely Remove Hardware" icon on the taskbar.
2. Select "USB Mass Storage Device", and then click "Stop".
3. If the "Stop a Hardware device" window appears, click "OK".
4. Disconnect the USB cable from the camcorder and PC.
• Use the provided USB cable. (Supplied by Samsung)
• Make sure you insert the USB plug into the USB jack with the plug
facing in the correct direction.
• Use the AC power adaptor to power the camcorder when
transferring fi les to your computer.
• When the USB cable is connected, turning the camcorder on or off
may cause the PC to malfunction.
• If you disconnect the USB cable from the PC or the camcorder while
transferring fi les, the data transmission will stop and the data may
be damaged.
• If you connect the camcorder to a PC via a USB HUB or
simultaneously connect the camcorder along with other USB
devices, the camcorder may not work properly. If this occurs,
remove all USB devices from the PC, and then reconnect the
camcorder.
• Intelli-studio may not automatically run. If this occurs, access My
Computer or Windows Explorer, open the drive that corresponds to
your camcorder, fi nd Intelli-studio, and then run iStudio.exe.
95 95