4.UNPACKING WAYS OF MAIN PARTS
Operation step
1 Undo the back cover
Undo two screws fit
between back plate and
cabinet, and then pull out
.
the back plate
2 Undo top cover
①
Undo 2 screws fit
between the top cover and
.
back cabinet
②
Push back the top cover
15mm until it leaves away
from, the control panel,
and then take it down.
3 Undo the control panel
①
Departing the top cover
(means as above)
②
Draw out the detergent
drawer
③
Loosen two screws fit
on the control panel
(facial).
④
Loosen two screws fit
on the control panel(top)
⑤
Press three clasps
between top control panel
and panel support.
⑥
Take out the control
panel inclined from the
.
cabinet
P.21
Picture