Undo The Absorber; Undo The Motor; The Failure Diagnosing And Changing Components - Midea l712wmb16 Service Manual

4.UNPACKING WAYS OF MAIN PARTS
Operation step
⑤ Remove the screws
fixing the front and rear
tub, and then remove the
tub.
⑥ Remove the inner
drum kit.

23 Undo the absorber

① Lift out the outer tub kit
(means as 21 above).
② Undo the absorber pin
between absorber and rear
tub, remove the absorber.

24 Undo the motor

① First let the machine lie
down on the back and then
pullout the motor wire and
grounding wire. Use spanner
to remove the motor screw,
and lift up the motor with the
other hand in case of falling
to the drain pump.
② After two screws are
removed, change the motor.
First support it to clasp the
correct position, then install
the screws, and then install
the belt.
P.29
Picture
减震器销 Airproof Ring
Pin 密封条