Using The Dv Interface Cable For Recording (Digital Dubbing) - Panasonic Palmcorder PV-GS90P Operating Instructions Manual

Digital video camcorder
Hide thumbs Also See for Palmcorder PV-GS90P:
Table of Contents

Advertisement

Using the DV Interface Cable for
Recording (Digital Dubbing)
By connecting other digital video equipment with
DV terminal and the Camcorder by using the DV
cable PV-DDC9/PV-DDC9-K (optional) 1, high-
image-quality dubbing can be done in digital
format.
≥Set to Tape Playback Mode.
(Player/recorder)
1
Connect the Camcorder and digital video
equipment with the DV cable.
2
Set [ADVANCED] >> [REC STDBY] >> [YES].
(Recorder)
3
Start playback. (Player)
4
Start recording. (Recorder)
Move the joystick up to select [
5
Move the joystick up to select the [
icon again to stop recording. (Recorder)
6
Stop playback. (Player)
ª
To cancel the standby for recording
When the Camcorder is standby for recording,
move the joystick down and select the [∫] icon.
≥Do not plug or unplug the DV cable during
dubbing, or the dubbing may not be completed
properly.
≥If a picture (bilingual video, etc.) containing main
sound and sub sound has been dubbed, select
the desired sound by [SETUP] >> [AUDIO OUT]
on playback.
38
LSQT1284
Edit mode
≥Even if you use a device equipped with DV
terminals such as IEEE1394, you may not be
able to perform digital dubbing in some cases.
For more information, see the instructions for
equipment connected.
≥Regardless of the menu settings on the
recorder, digital dubbing is carried out in the
same mode as the [AUDIO REC] mode of the
playback tape.
≥The images on the recorder monitor may be
disturbed, but it does not affect the recorded
images.
≥If a picture containing a copyright protection
signal (copy guard) is recorded by the
Camcorder, the picture is distorted by mosaic-
like patterns at playback.
≥While pictures are input from the DV terminal,
the operation icon blinks on instead of
appearing from the side of the screen when you
press the center of the joystick.
1
≥While pictures are input from the DV terminal,
the TV aspect will not change even if you
change the setting for [TV ASPECT] in the
[SETUP] menu.
CAUTION:
Unauthorized exchanging and/or copying of
copyrighted recordings may be copyright
infringement.
¥
/
;
] icon.
¥
;
/
]

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pv-gs90Palmcorder pv-gs9Palmcorder pv-gs90pc

Table of Contents