Adjusting Lcd Monitor/Viewfinder - Panasonic Palmcorder PV-GS90P Operating Instructions Manual

5
Move the joystick right or press it to set the
selection.
6
Move the joystick up or down in order to
select the item to be set.
7
Press the joystick to determine the setting.
ª
To exit the menu screen
Press the [MENU] button.
ª
To get back to the previous screen
Move the joystick left.
ª
About the menu setting
≥The menu is not displayed while recording on a
tape. Also, you cannot record on a tape while
the menu is displayed.
Before using

Adjusting LCD monitor/viewfinder

ª
Adjusting the brightness and color
level
1
Set [SETUP] >> [LCD SET] or [EVF SET] >>
[YES].
2
Move the joystick up or down in order to
select the item to be adjusted.
[LCD SET]
≥When the LCD monitor is rotated by 180°
towards the lens, the brightness of the LCD
monitor cannot be adjusted.
≥These settings will not affect the images actually
recorded.
: Brightness of the LCD monitor
: Color level of the LCD monitor
[EVF SET]
≥To adjust the brightness of the viewfinder, close
the LCD monitor and extend the viewfinder to
activate it.
≥These settings will not affect the images actually
recorded.
:Brightness of the viewfinder
3
Move the joystick left or right to move the
bar indication representing the brightness.
4
Press the [MENU] button or the joystick to
complete the settings.
21
LSQT1284