Haier HWM80-187S Service Manual page 8

Service Manual
Model NO:HWM80-187S
Figure 2 indicates the ex factory installation
position of the drain hose.
Extend the drain hose from the side of spin tub.
Put soft items on the ground. Lean the machine
down gently with the front surface facing the
ground. Take off the drain hose from the cabinet.
Take the hose out of the fixing groove.
(See to Figure 3).
Embed the drain hose into the groove along the side
of the spin tub in the order of (1)~(4), heading for the
side of the spin tub. (See to Figure 3).
Embed the drain hose into the groove with
hands. Ta ke care not to damage the drain
hose in fastening the fixing clamp.
Soft item
Soft item
Extend to the
spin tub side
7
Figure 2
Figure 3
Figure 4
Embed into the
groove in turn
Issue
Rev.