Using The Dv Cable For Recording (Digital Dubbing); Pc Connection With Dv Interface Cable - Panasonic Palmcorder MultiCam PV-GS32 Operating Instructions Manual

6
Move the Joystick Control [▼]
playback.
7
Stop recording.
• For more information, refer to the operating
instructions for your TV set and recorder.
When neither image nor sound from the
Camcorder is output to the TV set
• Check that the plugs are inserted as far as they
go.
• Check the connected terminal.
Using the DV Cable for Recording
(Digital Dubbing)
By connecting this Camcorder with other digital
video equipment (such as another Camcorder of
the same format/model) that has a DV input/output
Terminal, and using a 4-pin to 4-pin DV Interface
Cable PV-DDC9 (optional)
sounds can be dubbed in the digital mode.
• Set to Tape Playback Mode (Player/Recorder)
1
Connect the Camcorder and digital video
equipment with the DV cable.
Player/Recorder:
2
Insert the Cassette and set to Tape
Playback Mode.
Player:
3
Move the Joystick Control [▲]
playback.
33
Recorder:
4
Set [ ADVANCE] >> [
[YES], then move the Joystick Control [▲]
to select [ ].
• Recording starts.
38
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo
Editing Mode
to stop
33
, high quality images and
1
1
33 to start
[One-Touch Navigation icon]
REC STDBY] >>
S P 3 h 5 9 m 5 9 s 2 9 f
1 2 : 3 4 : 5 6 A M
J A N 2 2 0 0 5
To Cancel the Standby for Recording
When the Camcorder is standby for recording,
move the Joystick Control [▼] and select the [
To Stop Dubbing
Move the Joystick Control [▲] to select [
CAUTION:
Unauthorized exchanging and/or copying
of copyrighted recordings may be copyright
infringement.
• For other notes concerning this item, see page 54.
PC Connection With DV Interface
Cable
A video clip can be transferred directly to your PC
(Personal Computer) via a DV Interface Cable
(Optional) using products and software from a number
of video editing software companies.
Using products from video editing software companies
allows you to capture and edit video clips using the DV
Interface.
Our DVC being OHCI compliant should
have no problem working with any OHCI
compliant Firewire Card/video - Editing
software package.
• Personal Computer must be equipped with an DV
Terminal.
• During Camcorder playback, do not disconnect the
DV Interface Cable or turn the Camcorder off as this
may cause a PC hang-up error.
• 1394 (i.LINK) Interface must conform to OHCI (Open
Host Controller Interface Specification).
].
] again.