Table of Contents
Advertisement
Finding the End of Recording
( Blank Search Function)
The Blank Search Function aids you in locating the
end of the recording on the Cassette quickly (unused
part of the tape).
• Set to Tape Recording/Playback Mode.
1
Set [ BASIC] or [
BLANK SEARCH] >> [YES].
33
28
• The [
] indication and the One-Touch
Navigation icon appears during the Blank Search.
• Approximately 1 second before the last recorded
scene, the Camcorder switches to the Recording
Pause Mode or the Still Playback Mode.
• If there is no blank left on the Cassette, the
Camcorder stops at the end of the tape.
To Cancel the Blank Search Function
Before Completion
Move the Joystick Control [▼] to select [
Progressive Photoshot
When the [
] Indication is displayed, Progressive
Photoshot Function works. You can record still
pictures with higher quality by using this function.
• The Progressive Photoshot Function may not be
activated depending on the function you use. (p. 49)
• To record still pictures with higher quality, we
recommend setting to the Card Recording Mode.
(To activate the Progressive Photoshot Function
regardless of the function you use.)
• When you record onto the tape and the card
simultaneously, the Progressive Photoshot Function
is not activated.
Recording a Still Picture on a Card
(Photoshot)
Still pictures can be recorded on the Memory Card
from the Camcorder.
1
Set the [OFF/ON] Switch
• The [POWER] Lamp
26
30
2
Set the Mode Dial
Mode.
32
Recording Mode
ADVANCE] >> [
S P
3 h 5 9 m 5 9 s 2 9 f
R 2 : 0 0
1 2 : 3 4 : 5 6 A M
J A N
2
2 0 0 5
].
to [ON].
26
lights up.
30
32
to Card Recording
3
Press the [PHOTO SHOT] Button
23
• The [
] Indication lights up in red.
To record still pictures clearly
• When zooming in on the subject with a
magnification of 4× to 10× or higher, it is difficult
to reduce the slight hand shaking from holding the
Camcorder. We recommend decreasing the zoom
magnification and approaching the subject when
recording.
• When recording still pictures, hold the Camcorder
firmly with your hands and keep your arms
stationary at your side so as not to shake the
Camcorder.
• You can record stable pictures without hand
shaking by using a tripod.
On-screen display in the Card
Recording Mode
1 2 : 3 4 : 5 6 A M
J A N
2
2 0 0 5
1) Still picture size
2) Quality of still pictures
3) Number of recordable still pictures (When no
pictures can be recorded, the red light will flash.)
Recording with a shutter operation
effect
You can add a shutter operation simulating sound.
1
Set [
ADVANCE] >> [
>> [ON].
Selecting the quality of Photoshot
images
1
Set [ BASIC] >> [
[
(High Picture Quality)] or [
Picture Quality)].
33
28
• You can also change the picture quality on [
ADVANCE] >> [
Recording Mode.
23
.
1)
1 0 0
2) 3)
SHTR EFFECT]
PICT.QUALITY] >>
(Normal
PICT. QUALITY] in the Tape
23
Hide quick links:
Advertisement
Table of Contents
