Playing Back on Your TV
By connecting your Camcorder with your TV, the
recorded scenes can be viewed on your TV screen.
• Before connecting them, turn off the power of both
the Camcorder and TV.
1
Insert a recorded tape into this Camcorder.
2
Connect the [AV OUT] Jack of the
Camcorder and the Video and Audio Input
Jacks of the TV.
[S-VIDEO IN]
(PV-GS35 Only)
• Connect to the TV with the AV Cable
TV has an S-Video Jack, connect the S-Video
Cable (not supplied)
• When plugging the pin plug of the AV cable into
the [AV OUT] Jack, plug it in as far as it goes.
3
Turn on this Camcorder and set the Mode
Dial
to the Tape Playback Mode.
34
4
Select the input channel on the TV.
5
Move the Joystick Control [ ]
to select the [
35
playback.
• The image and audio are output
on the TV.
6
Move the Joystick Control [ ]
the [
] to stop playback.
If the image or audio from this
Camcorder is not output on the TV
• Check that the plugs are inserted as far as they
go.
• Check the connected terminal.
• Check the TV's input setting (input switch). (For
more information, please read the operating
instructions for the TV.)
40
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo
Playback Mode
[VIDEO IN]
[AUDIO IN]
2
1
MIC
A/V
. If the
1
, too (PV-GS35 Only).
2
] to start
to select
35
To Display the On-screen Information
on the TV
The information displayed on the LCD Monitor or
the Viewfinder (One-Touch Navigation icon, time
code and mode indication, etc.), date and time can
be displayed on the TV.
1
Press the [OSD] Button
Control. (PV-GS35 only)
• Press the button again to erase the OSD
information.
42
• For other notes concerning this item, see page 63.
on the Remote
42