Protecting The Files On A Card (Lock Setting); Formatting A Card - Panasonic PV-GS19 Operating Instructions Manual

SETUP
3
Move the Joystick Control [ ] or [ ]
select the number of pictures to be printed,
and press the Joystick Control
• The number of prints
picture set.
• You can select from 0 to 999. (Selected number
of pictures can be printed as you set the number
of prints with the printer supporting DPOF.)
• 2 or more files can be set in succession.
4
Repeat Steps 2 and 3 and press the [MENU]
Button 30 when the setup is completed.
About the DPOF
DPOF stands for Digital Print Order Format. This
enables the printing information to be added to the
pictures on the card so that it can be used on a
system supporting DPOF.
• For other notes concerning this item, see page 63.
Protecting the Files on a Card
(Lock Setting)
Precious files recorded on a Card can be locked to
prevent accidental erasure. (Even if files are locked,
the files will be deleted if the Card is formatted.)
• Set to Picture Playback Mode.
• The One-Touch Navigation icon is displayed on the
lower right of the screen.
1
Set [ BASIC] >> [
35
30
SETUP
2
Move the Joystick Control [ ,
to select the fi le to be locked, and press
35
the Joystick Control
SETUP
• The selected file is locked and the [
Indication appears. Repeat this procedure to
1
lock 2 or more files.
• Press the Joystick Control
Playback Mode
DPOF SET
2
1
2
2
ENTER EXIT
35 .
is displayed in the
2
PROTECT] >> [YES].
PROTECT
ENTER EXIT
, , or
.
35
PROTECT
1
ENTER EXIT
]
again to cancel.
35
3
Repeat Step 2 and press the [MENU] Button
when the setup is completed.
30
• The SD Memory Card has a write protection switch.
(p. 63)
• For other notes concerning this item, see page 63.
to
35

Formatting a Card

If a Card becomes unreadable by the Camcorder,
format it for reuse. Formatting erases all the data
recorded on a Card.
• When formatting the card all protected files
(lock) are also deleted.
• Set to Picture Playback Mode.
• The One-Touch Navigation icon is displayed on the
lower right of the screen.
1
Set [
>> [YES].
30
35
• A confirmation message appears, select [YES]
and formatting will be carried out.
• When the formatting is completed, the screen
becomes white.
• It may not be possible to use a Card formatted by
this Camcorder on another unit. In this case, format
the Card on the unit which will use the Card. Make
sure that valuable pictures are stored on your PC
before proceeding.
• Normally, it is not necessary to format the card. If
a message appears even though you insert and
remove the card several times, format it.
• A Card formatted on other equipment (e.g. PC)
might be unusable or it might take more time
for recording. We recommend that you use this
equipment to format the Card.
]
ADVANCE] >> [ CARD FORMAT]
CARD FORMAT
DELETES ALL DATA
NO
YES
SETUP ENTER EXIT
39