Using The Menu Screen - Panasonic PV-GS19 Operating Instructions Manual

Adjusting Brightness and Color Level
When [ LCD SET] or [
SETUP] Sub-Menu is set to [YES], the following
items are displayed.
LCD SET
SET
SETUP ENTER EXIT
[ LCD SET] LCD Brightness [
Adjusts the brightness of the image on the LCD screen.
[ LCD SET] LCD Color Level [
Adjusts the color saturation of the image on the LCD
screen.
[ EVF SET] Brightness of the Viewfinder
[ ]
Adjusts the brightness of the image in the Viewfinder.
To Adjust
Move the Joystick Control [ ] or [ ] and select the
item to be adjusted, and then move the Joystick
Control [ ] or [ ] to raise or lower the number of
vertical bars in the Bar Indication.
• More vertical bars indicates stronger brightness or
color saturation.
• In order to adjust the brightness of the Viewfinder,
close the LCD Monitor, and the Viewfinder will be
activated.
• These settings will not affect the images actually
recorded.
• For other notes concerning this item, see page 66.

Using the Menu Screen

To facilitate the selection of a desired function or
setup, this Camcorder displays various function setups
on Menus.
1
Press the [MENU] Button
30
• The Menu corresponding to the Mode selected
by the Mode Dial
• Do not switch the Mode Dial
is displayed.
34
35
EVF SET] on the [
EVF SET
SET ENTER EXIT
]
]
30 .
is displayed.
34
when the Menu
34
Before Using
2
Move the Joystick Control [ ] or [ ]
select the top menu.
3
Move the Joystick Control [ ]
it to set the selection.
4
Move the Joystick Control [ ] or [ ]
select the Sub-Menu.
5
Move the Joystick Control [ ]
it to set the selection.
6
Move the Joystick Control [ ] or [ ]
select the item to be set.
7
Press the Joystick Control
the setting.
• While a Menu is displayed, you cannot record or
play back. Menus can be displayed during playback
but not during recording.
To Return to the Previous Screen
Move the Joystick Control [ ]
To Exit the Menu Screen
Press the [MENU] Button
About the Menu Mode Setting
The setting selected on the Menu will be retained
even when the Camcorder is turned off. However,
if the Battery or AC Adaptor is disconnected before
turning off the Camcorder, the selected setup may
not be retained.
• Menu operation flow is shown in this text by >>.
BASIC
ADVANCE
SETUP
LANGUAGE
SETUP ENTER EXIT
BASIC
SCENE MODE OFF
REC SPEED SP
BLANK SEARCH NO
WIND CUT ON
CLOCK SET NO
SETUP ENTER EXIT
BASIC
SCENE MODE OFF
REC SPEED
BLANK SEARCH
WIND CUT
CLOCK SET
SETUP ENTER EXIT
35
35 .
again.
30
to
35
or press
35
to
35
or press
35
to
35
to determine
21