Chevrolet Corvette Owner's Manual page 221

If moving the transmitter to different locations
within the vehicle does not help, place the
transmitter in the glove box transmitter pocket
with the buttons facing to the right and then
press the START button.
•
The vehicle's battery voltage is low. The
battery voltage must be above 10 volts for the
keyless access transmitter to be detected
properly.
NO FOB - OFF OR RUN?
This message displays when the keyless access
transmitter is not detected inside the vehicle while
you are trying to turn the ignition off. Your vehicle
may be near a strong radio antenna signal causing
the keyless access system to be jammed. The
vehicle will remain in Acc. until OFF or START has
been pressed or five minutes has expired. If you
turn the ignition off and you cannot find the keyless
access transmitter, you will not be able to restart
the vehicle. The keyless access transmitter needs
to be inside of the vehicle in order for the vehicle to
start. See Starting the Engine on page 91 for more
information.
OPTIONS UNAVAILABLE
This message displays for a few seconds if a
keyless access transmitter that is not labelled 1 or 2
is used and you try to personalize the features on
your vehicle by pressing the OPTION button. The
personalization system will not recognize the
transmitter and the DIC will not display the current
driver number or the menus used to set
personalizations. The personalization features will
then be set to the default states. See DIC Vehicle
Personalization on page 232 for more information.
I n f o r ma t i o n P r o v i d e d b y :
221