Chevrolet Corvette Owner's Manual page 210

TRIP Button
The TRIP button displays the odometer, trip
distance, elapsed time, average speed, and oil life
remaining information.
Odometer: The odometer shows how far your
vehicle has been driven in either miles or
kilometers. Press the TRIP button to display
odometer readings, such as:
•
ODOMETER 12345 MI or
•
ODOMETER 20008 km
You can also display the odometer by turning on
the parking lamps.
Trip Odometers: There are two trip odometers.
Press the TRIP button to display TRIP
ODOMETER A readings and press the button
again to display TRIP ODOMETER B readings,
such as:
•
TRIP ODOMETER A 130.5 MI or
•
TRIP ODOMETER A 209.9 km
•
TRIP ODOMETER B 300.5 MI or
•
TRIP ODOMETER B 483.5 km
210
Both of the trip odometers can be used
simultaneously. TRIP A could be used to track the
distance to a destination. TRIP B could be used
to track maintenance periods. The trip odometers
can be reset by pressing the RESET button on
the DIC.
There is also a miles since last ignition feature
that displays the number of miles (kilometers)
driven since you last started the vehicle. Press and
hold the RESET button for three seconds, then
release it. The miles (kilometers) since the
last ignition cycle will be set into the trip odometer.
Elapsed Timer: Press the TRIP button until
ELAPSED TIMER is displayed, such as
ELAPSED TIMER .00.
When the ignition is in on, the DIC can be used as
a stopwatch. The display can show hours,
minutes and seconds. The elapsed time indicator
will record up to 23 hours, 59 minutes and
59 seconds, then it will reset to zero and continue
counting. The display appears as
ELAPSED TIMER .00 in the elapsed time function.
I n f o r ma t i o n P r o v i d e d b y :